DT 616 - Diodentestgerät
- The measurement range is 1µA to to 4 mA.
- Manually testing of electrical devices in development, production and quality assurance
- Integration into an automated test system via serial interface and SPS-interface
- Automated DUT testing with rates of up to 20 DUTs per second
- Forward voltage measurement
- Zener voltage measurement
- EZ-measurement
- Breakdown voltage measurement
- DVBR-measurement
- Reverse current measurement
- Kelvin contact measurement method
- Contact and polarity test of each measurement cycle
- Separate error counter for the different test steps
Merkmale
The DT 616 tester is used for series measurement of diodes. It enables the testing of standard diodes, unipolar and bipolar Zener diodes:
1. Forward voltage VF
The voltage drop at the DUT is caused by a test current which is adjustable from 0.1 up to 20 A. It is measured at a resolution of 1 mV.
2. Zener voltage VZ
The test voltage is from 0 to 700 V. The measurement current ranges from 1 up to 500 mA.
3. EZ-measurement
For EZ measurement, the test current is being varied by ± 10%. The subsequent voltage change is measured.
4. Breakdown voltage VBR
The VBR-test voltage is adjustable in a range from 10 up to 2,500 V.
The tolerance range is set by a minimum and a maximum limit. The test voltage is limited to an adjusted maximum VBR +100 V.
5. DVBR-measurement
After the first VBR-measurement a second measurement cycle is started. During the first cycle an internal compensation voltage is measured, which is now used as reference. The DVBR-measurement can be implemented at a higher resolution.
6. Reverse current IR
Reverse current measurement is determined by applying a blocking voltage and monitoring the current value.